Cemented carbide rod is a kind of hard alloy commonly used for machining and cutting materials. It has the advantages of wear resistance, corrosion resistance and high hardness, etc. However, due to long-term use and the influence of the external environment, Cemented Carbide Rods are subject to a certain degree of wear and damage. Therefore, proper care and maintenance is very important to extend the service life of Cemented Carbide rods. The following will introduce some methods and precautions for the care and maintenance of Cemented Carbide rods.
1. Preparation before use
Before use, some preparations need to be made to ensure the effectiveness and service life of Cemented Carbide Rods. Firstly, check the quality and appearance of the tungsten carbide rods. If any obvious damage or deformation is found, the carbide rods should be replaced with new ones in time. Secondly, it is necessary to choose suitable carbide rods for processing. Carbide rods of different shapes and materials are suitable for different processing tasks and should be selected according to specific needs.
2. Proper storage
Carbide rods need to be stored properly when not in use to avoid contamination or damage. Firstly, store Cemented Carbide rods in a dry, ventilated place to avoid erosion by moisture and chemicals. Secondly, place the tungsten carbide rods in special shelves or boxes to avoid direct contact with other items. It is important to mark the specifications and the date of use on the tungsten carbide rods, so that they can be easily identified and managed when in use.
3. Pay attention to the use environment
When using tungsten carbide rods, pay attention to the use environment to avoid damage due to environmental factors. Firstly, keep the processing place clean and tidy to avoid debris and dust from entering the processing area of tungsten carbide rods. Secondly, the processing temperature and humidity should be controlled to avoid the influence of too high or too low ambient temperature and humidity on the tungsten carbide rods. Avoid using the tungsten carbide rods in the environment containing corrosive substances such as acid and alkali to avoid corrosion and damage.
4. Pay attention to the operation mode
When using cemented carbide rods for processing, pay attention to the correct operation mode to avoid damage to cemented carbide rods caused by improper operation. Firstly, choose the appropriate cutting speed and feed speed to avoid too high or too low speed causing damage to the carbide rods. Second, use the appropriate coolant to reduce the machining temperature and improve the cutting performance of the tungsten carbide rods. Use suitable cutting tools and fixtures to ensure the stability and accuracy of the carbide bar during machining.
5. Regular inspection and maintenance
Regular inspection and maintenance is the key to keep the carbide bar in good condition. Firstly, the quality and appearance of the cemented carbide rods should be checked regularly, and they should be replaced in time if any obvious wear or other damage is found. Second, the carbide rods should be cleaned regularly to remove dirt and chips for better machining. Appropriate maintenance lubricants should be used to lubricate and prevent rust on the carbide rods to extend their service life.
In conclusion, proper care and maintenance is very important for the service life and machining results of carbide rods. Through good preparation before use, proper storage, attention to the use of the environment, correct operation and regular inspection and maintenance, etc., you can effectively extend the service life of cemented carbide rods and improve their processing effect. I hope the above content is helpful to you.
National Service Hotline
0731-2761-5608
Mr. Peng
Mobile: +86 18573310866
Email: 280097448@qq.com
Lucy Fu
Moblie/whatsApp: +86 13786302016
Email: lucyfu@zzkrhj.com
Linda Tian
Moblie/whatsApp: +86 15673354243
Email: lindatsn@zzkrhj.com
Tina Wen
Moblie/whatsApp: +86 18673436027
Email: tina@zzkrhj.com